Accessories for Steel Buildings – Light Transmitting Panels

Share on Facebook  Share on Google+  Share on Linkedin
 
There are many accessories customers request for their steel buildings with light transmitting panels (or LTP) being among the most requested. People either love them or hate them - but the popularity of LTP's for steel buildings seems to stem from owners who are motivated to reduce their lighting/electric costs by introducing natural light into the building. In this post, we are going to look at LTP's in a little detail and discuss the different kinds of LTP's and some pros and cons.
 

Roof LTP's and Wall LTP's

For most customers, LTP's are thought of as being only in the roof and often referred to as "skylights", when in fact, LTP's for steel buildings can be installed in either the roof OR in the wall of the steel building. Referring to LTP's as "skylights" might be misleading customers might be thinking that LTP's are more involved/sophisticated than they really are - as they are apt to draw an analogy to skylights used in residential construction. The fact is that standard LTP's are simply clear translucent panels that share the same profile as PBR panel. Whether installed on a roof or wall, a section of the steel PBR panel is removed and an LTP is put in its place - overlapping the steel PBR panel - with stitch screws to hold the LTP panel down and mastic sealant used at the seams where it overlaps the PBR panel.
 

Roof LTP's or Wall LTP's - Which is Best?

wallltppanelsMost customers have (or develop) a love/hate relationship with Roof LTP's - they either love them or hate them. Personally, I hate them. On the most fundamental of levels, I have a hard time justifying creating points of penetration in a brand new roof for the sake of allowing some sunlight into the steel building. On a more practical level, one of the most attractive features of steel buildings - is that they are near maintenance free - BUT - Roof LTP's need regular cleaning in order to maintain their effectiveness as the rain, pollution, and debris that collects on them needs to be removed. It's not uncommon for the individual who is tasked with cleaning the Roof LTP's on their steel buildings to accidentally step on and crack one - resulting in the need for replacement (and also resulting in a leak until the replacement can be obtained and installed).
 
In contrast, Wall LTP's (pictured to the left) are less needing of maintenance and also less likely to be damaged during periodic cleaning. While Wall LTP's can be placed anywhere on a wall, from a security standpoint, the best place is at the top of the wall. Wall LTP's are installed pretty much the same way that Roof LTP's are installed but due to the horizontal nature of the wall they don't collect the same amount of dirt on them. While they might need an occasional cleaning, this can easily be done with a brush on an extension pole and hose. It's important to keep in mind that the wall that you choose to put them on is important. Unlike Roof LTP's that are likely to allow sun in throughout the day, Wall LTP's are going to be much more effective when placed on the eastern or western facing wall of steel buildings. Placing Wall LTP's on the north or south facing walls will not likely produce the desired effect.
 

Are you thinking about LTP's for the steel buildings in your project?

Our dedicated staff is only a phone call away and will be glad to discuss the wide variety of accessories for steel buildings - including light transmitting panels. Even if you are NOT ready for a quote just yet, we invite you to benefit from our experience and further allow you to assist us in helping you make an informed decision about the steel buildings in your future. Our design team is knowledgeable, experienced, creative, and customer focused - and our Pro-Select Erecting™ crews are among the finest in the industry. Call us today to discuss steel buildings or simply fill out our easy online quote request to get started!

Price Your Building